Orders $300 and over eligible for free ground shipping withing the 48 contiguous states!

trò chơi xổ số

**Paul C Buff will be closed on Labor Day, September 4th, 2017.

Celestial Flash Unit

$649.95
SKU: CELESTIAL-KIT
Eligible for FREE Shipping for orders over $300!

Overview

The Celestial Flash Unit features HSS and TTL flash capabilities, a built-in receiver, a 160W equivalent daylight balanced modeling light, and is fully battery powered (can be charged while shooting). The HSS and TTL capabilities are controlled by the HUB remote (HUB remote required for firmware updates).


Perfect for: Both outdoor and studio photographers looking for high-end specs without the weight or the price!

FEATURES
12 f-stop power variability (0.25 Ws to 500 Ws)
Adjustable in precise 1/10 f-stops
All-digital control from LCD display
Built-in CyberSync Transceiver
Designed for use with HUB remotes
Compatible with CST3, CyberCommander, and CyberSense remotes*
Global plug-and-play from 100 to 240 VAC
Available Modes: ACTION, COLOR, HSS (up to 1/8000 sec.), TTL
Action stopping flash durations as short as 1/18,600 sec. (t.1)
Color consistency +/- 50K at any power
Bright, adjustable 160W Equivalent Daylight-Balanced LED Modeling Lamp
Rubber diffusion dome cover
Audible and visual recycle indicators
Battery Powered (Can be charged while shooting)
 
*These transmitters do not allow for HSS and TTL capabilities.
ARRIVES WITH
Magnetic rubber diffusion dome
Celestial shipping cover
Flashtube
Battery and charger
30-Day Absolute Satisfaction Guarantee
2-Year Factory Warranty
 

Product Video

Product Specs

  Celestial Flash Unit
Watt seconds 500 Ws
Action Mode - Power Variability 12 f-stops (full to 1/2048 power)
Color Mode - Power Variability 12 f-stops (full to 1/2048 power)
HSS Mode - Power Variability 12 f-stops (full to 1/2048 power)
Recycle to Full 1.5 sec.
Flash Duration (t.5) - in Action Mode 1/800 sec. (at full power) | 1/21,400 sec. (at minimum power)
Flash Duration (t.1) - in Action Mode 1/340 sec. (at full power) | 1/18,600 sec. (at minimum power)
Flash Duration (t.5) - in Color Mode 1/800 sec. (at full power) | 1/10,800 sec. (at minimum power)
Flash Duration (t.1) - in Color Mode 1/340 sec. (at full power) | 1/8,200 sec. (at minimum power)
Power Requirements 18VDC, 45Wh battery
Charger Requirements IN: 100-240-VAC, 50/60Hz, 1A, OUT: 20.5VDC, 2.5A Max
Internal Receiver Range 75’ – 200’, depending on orientation
Sync / Trigger Voltage Less than 5 volts (safe for use with DSLR cameras)
Modeling Lamp 160 W Equivalent Daylight-Balanced
Modeling Lamp Usage ~90 mins. at full power on a fully charged battery
Modeling Lamp Fan Audibility (Full) No internal fan
LUX at 6' with bare bulb 340lx
LUX at 6' with diffusion dome 200lx
LUX at 6' with diffusion dome and 8.5HOR 500lx
LUX at 3' with bare bulb 1500lx
LUX at 3' with diffusion dome 800lx
LUX at 3' with diffusion dome and 8.5HOR 1800lx
Flashtube 10mm single-ring flashtube (daylight-balanced and UV-coated)
LCD Display 2.3" display
Stand Mount Fits stands up to 5/8 in.
Umbrella Mount Accepts umbrella rods up to 9mm
Weight 4.6 lbs. with Battery
Dimensions 6.5 in. (height) x 5.25 in. (width) x 8 in. (length)

Dimensions Note: length measurements taken from the front of the shipping cover (in place on the unit’s faceplate) to the back panel; height measurements taken from the top of the flash unit to the bottom of the light stand top coupler, folded back underneath the unit; width measurements taken from side to side at the widest points

 
gà chọi c1 Mua vé số trực tuyến Mua vé số Vietlott Xổ số miền Nam Xổ số miền Bắc